What is the finishing process of cashmere and wool factories

May 11, 2024

Leave a message

1. Add cashmere shrinkage agent at a dosage of 3% (o.w.f) or add 10% swelling agent diluted at 1:1, stir well in 40℃ water, and soak the soaked cashmere sweater for 15~ After 20 minutes (the short pile soaking time is slightly longer), start using laundry equipment or manual squeezing to wash and shrink for 3 to 30 minutes. The time mainly depends on the requirements of the pile surface;

Jacquard or multi-color cashmere and wool sweaters should not be soaked for a long time, and cashmere sweaters of different colors should not be washed together.

2. Squeeze out the water from the washed cashmere sweater, rinse it with room temperature water until there is no foam, and then put it into a dehydration cylinder for dehydration;

If the blended fabric, raw cashmere or raw yarn contains more than 60% fine wool, it is recommended to perform mercerization or enzyme treatment. Nowadays, anti-shrink mercerization is mainly used:

A. Adjust the water temperature to 25℃, add 3% (o.w.f) special mercerizing agent 1#, and 1% (o.w.f) oxalic acid, add a little water softener to adjust the pH value of the bath solution to 5, stir the bath solution evenly, and put in The fabric reacts for 35 minutes. During the reaction, the fabric must be stirred at a constant speed or the equipment must be rotated slowly.

B. Adjust the water temperature to 35°C, add 5% (o.w.f.) mercerizing reducing agent 2#, stir the bath liquid evenly, and put it directly into the fabric to react for 25 minutes. During the reaction, the fabric needs to be stirred at a constant speed or the equipment must be rotated slowly.

C. Rinse with normal temperature water until there is no foam, then put it into the dehydration cylinder for dehydration.

3. To improve the hand feel, put 5 to 6% (o.w.f) cashmere softening agent into 38°C water, add a little water softening agent to adjust the pH value to about 5.5, stir evenly, put in the dehydrated cashmere sweater and soak it for 30 to 35 minutes , stir gently for one minute at a slow speed every five minutes. (Jacquard, multi-color cashmere sweaters or velvet or plant fiber fabrics should also not be soaked for a long time);

4. Spin dry directly and bake 70% to dry. When strong slipperiness is required, prototype drying can be used. Do not hang it in the sun;

5. After drying and drying in the shade, use medium-temperature (around 140°C) steam to iron and flatten. Keep a distance of 0.5-1CM between the iron and the cashmere sweater. Do not press it on top. If you use other irons, you must put a wet towel on it.