1.Cashmere content
National standard: cashmere fiber content higher than 95% can be called pure cashmere, which is a rigid standard without room for ambiguity.
2.Fiber diameter
The fiber diameter is one of the main indicators to distinguish the quality of cashmere, which affects the soft feel of the product. The diameter of cashmere fiber is generally between 14 microns ~ 25 microns, the finer the better, the better the quality, on the contrary, the thicker the feel.
3.Fiber length
Fiber length is also one of the important indicators to judge the quality of cashmere, fiber length and linter ratio affect the spinning quality and pilling performance of products. The length of cashmere fiber is between 28 mm ~ 40 mm, the longer the fiber length, the better the quality, and the shorter the ball resistance, the worse the ball resistance.
4.Contains crude rate
Refers to the share of coarse cashmere with a diameter greater than 25 microns in cashmere fiber, the higher the value, the higher the coarse content, which affects the delicate appearance and wearing comfort of the product, and the coarse content depends on the carding process.
5.Impurity rate
The proportion of non-cashmere components of other fibers such as wool and impurities (non-fibrous impurities (including skin dander)) is higher in the value of cashmere fiber, which affects the delicate appearance and wearing comfort of the product, and the coarse content depends on the carding process.
6.Damage fiber rate
Some cashmere is not obtained by normal living fleece, mainly refers to gray fleece and reused fleece, gray fleece (the fleece that is soaked in lime water and faded from goatskin) has poor gloss, and the feel of the product is also affected to a certain extent; Recycled fleece (recycled cashmere fibers) is impaired. Gray fleece and reused cashmere have been damaged during the collection process, which seriously affects the feel and wear life of cashmere. The damage fiber rate refers to the percentage of the number of fiber roots that are significantly damaged on the fiber surface to the total number of roots.
7.Stripping fiber rate
The cashmere that is close to the appearance of white cashmere obtained by chemically treating purple cashmere or green cashmere to fade its color is called peeled cashmere. Such cashmere will have the problem of poor dye fastness in subsequent processing. The peeled fiber rate is the percentage of this type of stripped fiber in the total number of fibers.
